Yamaha RX-V990 To set the SLEEP time, To cancel the selected SLEEP time

SETTING THE SLEEP TIMER

If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is helpful.

Notes:

•The SLEEP timer can be controlled only with the remote control transmitter.

•The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel of this unit.

ENGLISH

To set the SLEEP time

1

SLEEP

SLEEP

Flashes continuously.

Whenever the SLEEP key is pressed, the SLEEP time will change as follows:

(Minutes)

The SLEEPtimer is OFF. (The indication before the SLEEP key is pressed.)

After a while, the display returns to the indication before the SLEEP timer is set, and the “SLEEP” indicator stops flashing and lights up.

2 The unit will be turned off automatically at the selected SLEEP time.

To cancel the selected SLEEP time

1

SLEEP

Press the SLEEP key until “SLEEP OFF” appears on the display.

SLEEP

SLEEP

Press once or more so that the display returns to the indication before the SLEEP timer is set. (“SLEEP” will go off from the display.)

Note:

The SLEEP timer setting can also be canceled by turning off the power with the POWER switch or disconnecting the power plug of this unit from the AC outlet.

33