Yamaha RX-V990 Features

Features

• Five Speaker Configuration

Front:	100 W + 100 W (8Ω) RMS Output Power,
	0.015% THD, 20-20,000 Hz
	120 W + 120 W (6Ω) RMS Output Power,
	0.04% THD, 20-20,000 Hz (USA Model Only)
Center:	100 W (8Ω) RMS Output Power,
	0.015% THD, 1 kHz
Rear:	25 W + 25 W (8Ω) RMS Output Power,
	0.08% THD, 1 kHz

•Digital Sound Field Processor

10 Programs including “Cinema DSP” 70mm Movie Theater

•5 Channel Discrete Input for Dolby Surround Digital AC-3

•Automatic Input Balance Control for Dolby Pro Logic Surround

•Test Tone Generator for Easier Speaker Output Balance Adjustment

•3 Center Channel Modes (NORMAL/WIDE/PHANTOM)

•40-Station Random Access Preset Tuning

•Automatic Preset Tuning (FM only)

•Preset Station Shifting Capability (Preset Editing)

•IF Count Direct PLL Synthesizer Tuning System

•Video Signal Input/Output Capability

•SLEEP Timer

•Remote Control Capability

•Program and status messages superimposed on connected video monitor

Contents

Page Page FCC INFORMATION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT We Want You Listening For A Lifetime Contents SUPPLIED ACCESSORIES Features Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP Directional Enhancement Circuit + DSP SPEAKERS TO BE USED SPEAKER CONFIGURATION Five-SpeakerConfiguration Four-SpeakerConfiguration SPEAKER PLACEMENT 1POWER 2SPEAKERS A, B 3PHONES 4TONE BYPASS 5BASS EXTENSION 9DSP Adjustment Control Section 0BALANCE AREC OUT Selector BVIDEO AUX Input CVOLUME CONNECTIONS WITH OTHER COMPONENTS CONNECTING SPEAKERS ABOUT THE ACCESSORY TERMINALS 1LOW PASS terminal 2CENTER OUTPUT terminal 3REAR OUTPUT terminals GND terminal (For turntable use) 4FRONT CH — MAINÊ IN terminals 5FRONTÊ CH — PREÊ OUT terminals 6FRONT LEVEL switch 75CH DISCRT INPUT terminals CONNECTING SÊ VIDEO TERMINALS ON SCREEN DISPLAY CONNECTING TO VIDEO AUX TERMINALS (FRONT PANEL) ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT Five speaker configuration Four speaker configuration Page To play a source To record a source to tape (or dub from tape to tape) Selecting the SPEAKERS system Using the TONE BYPASS switch Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the BASS EXTENSION switch AUTOMATIC TUNING MANUAL TUNING PRESET TUNING Manual Preset Tuning To program stations To recall a preset station Automatic Preset Tuning Exchanging Preset Stations Page Description of Each Sound Field Program Description of Dolby Pro Logic Surround To play a source with the digital sound field processor Dolby Surround AC-3 Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME To set the SLEEP time To cancel the selected SLEEP time Battery installation Battery replacement For Control of This Unit For Other Component Control REMOTE CONTROL “LEARNING” FUNCTION To learn a new function To clear a learned function To clear all learned functions Troubleshooting guide TROUBLESHOOTING SPECIFICATIONS