To play a source with the digital sound field processor

2

3

1 Follow steps 1 - 6 shown in “BASIC OPERATIONS” on page 21.

2 Select the desired program that is suitable for the source.

DIGITAL SOUND FIELD PROCESSOR

 

 

 

 

70mm

TV

PRO LOGIC ENHANCED MOVIE THEATER

THEATER SPORTS STADIUM

 

 

 

 

 

 

 

 

 

 

 

 

ROCK

CONCERT

CONCERT JAZZ CLUB CHURCH

HALL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRO LOGIC

The selected program name is shown on the display.

3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on page 31, 32.)

Notes:

•If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

•When STADIUM, ROCK CONCERT, JAZZ CLUB, CHURCH, or CONCERT HALL is selected, no sound is heard from the center speaker.

•When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center chan- nel.

•When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by over adjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

Dolby Surround AC-3

Dolby Surround AC-3 is the next generation of multi- channel consumer audio. It uses a low bit-rate audio encoding scheme, creating a single composite data stream that contains five high-quality full-range channels, plus a sixth low frequency effect channel (called “5.1”).

This unit is equipped with 5 CH DISCRT terminals for Dolby Surround AC-3.

To listen to a 5 CH DISCRT SOURCE:

Press the LD/TV button so that “5 CH DISCRT” appears on the display. To cancel it, press the switch again.

•When you switch to “5 CH DISCRT” mode, the Digital Sound Field processor features of this unit are no longer available. The CENTER MODE switch, DELAY TIME switch and EFFECT switch also no longer work.

•Signals connected to the 5CH DISCRT INPUT are not output to the tape decks or video recorders. To record the signals from an LD player, you must connect the player to the LD/TV terminals.

LD/TV

30