Click Level

Pattern Clear

You can set the level of the RX21’s click track (rhythm guide during real time re- cording) before or during recording. Simply press the LEVEL key twice, then the BEAT key. You can now set the click track level using the -1/NO and +1/YES keys. The available click level range is 00–31. 00 turns off the click track. When setting the level, the -1/NO and +1/YES keys can be pressed for single unit change, or held down for rapid continuous change. Note that the Click level you have set will remain, even after you turn the RX21 power off.

Setting Click level (Example: reducing level from 31 to 20, while recording on pattern 00)

Single patterns can be cleared (erased) by selecting the pattern to be cleared and first pressing the CLEAR button. The RX21 then gives you the chance to confirm your intention to clear the pattern by displaying the “CLEAR PTNpp ?" message (where "pp" is the number of the selected pattern). If you decide you don’t want to clear the pattern, press the -1/NO button to cancel the clear function.

If you want to clear the pattern, press the +1/YES key. The LCD will show the “PTN

ppCLEARED!” display, followed by the “SELECT PTNpp” display. If you have selected a pattern that is already clear, the LCD will switch directly back to the "SELECT PTN pp" display. If you have selected a preset pattern, the LCD will show “PRESET PTN AREA!", followed by the “SELECT PTNpp" display (preset patterns are permanently stored and cannot be cleared).

Pattern Clear (Single) (Example: clear pattern 00)

CLEAR PTN ØØ ?

PTN ØØ CLEARED !

All programmable patterns in the RX21’s memory (numbers 00-55) can be cleared simultaneously if required. This is a “hidden function” in the sense that it cannot be accessed directly-in order to prevent accidental erasure of the entire memory contents.

22