TUNING
Automatic tuning
Automatic tuning is effective when station signals are strong and there is no interference.
1Press FM/AM repeatedly to select the reception band (FM/AM).
2Press TUNING MODE to select “Auto tune”.
p Auto tune [ FM 87.50MHz
3Turn PRESET/TUNING to begin automatic tuning.
When this unit is tuned into a station, the TUNED indicator lights up and the frequency of the station is shown on the front panel display.
FM 94.90MHz
y
If the station provides Radio Data System information, the program service information will be shown on the front panel display.
Manual tuning
If the signal from the station you want to select is weak, tune into it manually.
1Press FM/AM repeatedly to select the reception band (FM/AM).
2Press TUNING MODE repeatedly to select “Manual tune”.
pManual tune[ FM 87.50MHz
3Turn PRESET/TUNING to select the desired frequency.
When this unit is tuned into a station, the TUNED indicator lights up.
Selecting preset stations
You can tune into any desired station simply by selecting the preset station number.
Note
See the next page to preset stations.
1Press TUNING MODE repeatedly to select “Preset tune”.
2Turn PRESET/TUNING to select the desired preset station number.
■Improving FM reception
If the signal from the station is weak and the sound quality is not good, set the FM radio wave reception mode to the monaural tuning mode to improve reception.
Press FM MODE repeatedly to select “AUTO STEREO” (stereo mode) or “MONO” (monaural mode) when this unit is tuned into an FM radio station.
•When this unit is in the stereo tuning mode, the STEREO indicator lights up on the front panel display.
•When this unit is in the monaural tuning mode, the STEREO indicator goes off.
Note
Even if this unit is in the stereo tuning mode, the STEREO indicator does not light up when the current program is monaural.