PRESETTING STATIONS

You can tune into stations easily by storing (presetting) and recalling them. This function enables this unit to preset up to 40 FM and AM stations.

Automatic station preset (FM stations only)

Note

To preset AM stations, see “Manual station preset” below.

1Press FM/AM repeatedly to select the reception band (FM).2Press and hold MEMORY for more than 3 seconds.

“Auto Preset” flashes on the front panel display. This unit starts searching the stations with strong signals and stores them automatically.

Auto Preset

CH__ FM100.05MHz

When automatic station preset is completed, this unit tunes into the station preset to “01”.

Notes

•Only FM stations with sufficient signal strength are stored automatically. To store a station with weak signal strength, store it manually. See “Manual station preset” below.

•When you rerun “Automatic station preset”, all of the preset data will be deleted and new preset data will be set to each preset number.

•If no station is found, the search ends and this unit returns to the previous station tuned in before the search.

3Turn PRESET/TUNING to select the desired preset station number while the preset station number flashes.

CH01 FM 99.80MHz

Preset station number

Note

Perform the next operation within 5 seconds after selecting the preset station number.

4Press MEMORY again to confirm the preset.

Notes

•When you preset a new station to an existing preset number, new preset data will overwrite the existing preset data.

•The reception mode (stereo or monaural) is stored along with the station frequency.

Clearing the preset station

Follow the steps below to clear a preset station one at a time.

1Select the desired preset station number.

See “Selecting preset stations” on page 4.

2Press CLEAR.

The selected preset station number flashes on the front panel display.

Flashes

OPERATIONS

Manual station preset

1Tune into the desired FM/AM station.

See page 4 for tuning instructions.

2Press MEMORY.

The preset station number flashes on the front panel display for 5 seconds.

Note

Perform the next operation within 5 seconds after pressing

MEMORY.

p CLEAR CH01[ CH01 FM 99.80MHz

If you do not perform the next operation within 5 seconds, the clearing is canceled.

3Press CLEAR to confirm.

“PresetXX Cleared” (XX indicates the preset number) appears on the front panel display.

y

To clear all preset stations, press and hold CLEAR for 3 seconds. “ALL CLEAR” appears on the front panel display.

English

5 En