Yamaha TG500 Loop, R1 R3, RR (Rates 1 3, release rate)

132
VOICE EDIT MODE / 3: Full Edit. 3-4: PEG
3-4-01: LEVEL / 3-4-02: RATE
Loop
Range: off, on
When the Loop parameter is set to “on” the pitch EG cycle repeats from
the beginning (L0) to the L3 level until the keys being played are released.
When set to “off,” the L3 level is maintained until the keys being played are
released.
R1 … R3, RR (Rates 1 … 3, release rate)
Range: 0 ... +63
These parameters work in conjunction with the level parameters described
above to determine the “shape” of the pitch envelope generator for the selected
element.
The “Rate” parameters work in the same way as the amplitude envelope
generator rate parameters: a setting of “63” produces the fastest (almost instan-
taneous) rate between levels, while the minimum setting of “0” produces the
slowest change.
The pitch envelope begins at L0 (Level 0), moves to L1 (Level 1) at a rate
determined by the setting of R1, then to L2 (Level 2) at R2 (Rate 2), and then
to L3 (Level 3) at R3 (Rate 3). The pitch stays at L3 until the key is released,
and then moves to RL1 (Release Level 1) at the rate determined by RR
(Release Rate).
Highest Pitch
(+63)
Lowest Pitch
(-64)
●
●
L2
L3
RL1
R3
R2
L0
Key ON
(Beginning of note) Key OFF
(End of note)
RR
Center (normal)
Pitch
●
●
●
R1 L1