202
MULTI EDIT MODE / 2: Name
NAME
2: NAME
Your original multi setups should naturally have original names. This function can
be used to assign a name of up to 8 characters to the current multi setup.
Name
Range: See character list, below
Use the [ ] key to move the character cursor to the left, and the [ ] key to
move the cursor to the right. Use the [-1/NO] and [+1/YES] keys to select a
character for the current cursor position. The available characters are listed
below.
The entire name can be cleared by pressing the [EDIT/COMPARE] key
while holding the [UTILITY/SELECT] key, and a space can be entered at the
cursor position by pressing the [STORE/COPY] key while holding the
[UTILITY/SELECT] key.
(Space)
[PLAY/MODE] -> MLT PLAY -> [EDIT/COMPARE] -> [PAGE] -> 2: Name -> [ENTER]