LISTENING TO CD AND USB DEVICES
Listening to a USB device
1 | 2 |
RADIO
AUX USB
CD iPod
Your iPod/iPhone/iPad can also play back music and recharge while connected to the USB port (☞ P. 6).
1 Press the USB source button to switch the audio source to USB.
If a USB device is already connected, playback will start.
2 Connect a USB device to the USB port.
Playback starts automatically. Playback can be controlled using either the remote control, the unit, or the USB device (☞ P. 2, 4).
Folders and files will play in the order in which they were written.
Stop playback before disconnecting the USB device.
Skipping folders (remote control only)
While a USB device is playing, you can use the remote control’s FOLDER ▲/▼ buttons to select the folder.
Display information (remote control only)
The folder/file number is shown for several seconds when starting playback or skipping tracks.
If you press DISPLAY on the remote control while a song is playing or paused, the information shown on the front panel display will be switched in the order shown at right.
* Shown only if this data is included in the song.
Elapsed song playback time
Song name*
Album name*
Artist name*
File name
Folder name
Using repeat/shuffle playback (remote control only)
The playback status is shown by the repeat/shuffle indicator (☞ P. 3) in the front panel display.
Repeat playback
Press 
(repeat) on the remote control repeatedly to select one of the following playback modes.
No display: Repeat mode off
: | 1 track |
: All tracks within the folder (data CD/ USB device only)
: All tracks
Shuffle playback
Press (shuffle) on the remote control repeatedly to select one of the following playback modes.
No display: Shuffle mode off
: All tracks within the folder (data CD/ USB device only)
: All tracks