TROUBLESHOOTING

 

 

 

 

 

Bluetooth

 

 

 

 

 

 

 

Problem

Cause

Solution

 

 

 

 

 

Cannot make this unit paired

The other component does not support A2DP.

Perform pairing operations with a component which

 

with the other component.

 

supports A2DP.

 

 

A Bluetooth adaptor, etc. that you want to pair

Use a Bluetooth adaptor, etc. whose password is “0000”.

 

 

with this unit has a password other than “0000”.

 

 

 

This unit and the other component are too far

Move the other component closer to this unit.

 

 

apart.

 

 

 

There is a device (microwave oven, wireless

Move this unit away from the device that is emitting radio-

 

 

LAN, etc.) outputs signals in the 2.4 GHz

frequency signals.

 

 

frequency band nearby.

 

 

 

 

 

 

Can’t establish a Bluetooth

This unit is not registered on the other

Perform pairing operations again (☞ P. 9).

 

connection.

component’s Bluetooth connection list.

 

 

 

 

 

 

No sound is produced or the

The Bluetooth connection of this unit with the

Perform Bluetooth connection operations again (☞ P. 10).

 

sound is interrupted during

other component is disconnected.

 

 

playback.

 

 

 

This unit and the other component are too far

Move the other component closer to this unit.

 

 

 

 

apart.

 

 

 

 

 

 

 

There is a device (microwave oven, wireless

Move this unit away from the device that is emitting radio-

 

 

LAN, etc.) outputs signals in the 2.4 GHz

frequency signals.

 

 

frequency band nearby.

 

 

 

 

 

 

 

The other component’s Bluetooth function is off.

Turn on the Bluetooth function of the other component.

 

 

 

 

 

 

The other component is not set to send Bluetooth

Check that the Bluetooth function of the other component

 

 

audio signals to this unit.

is set properly.

 

 

 

 

 

 

The pairing setting of the other component is not

Set the pairing setting of the other component to this unit.

 

 

set to this unit.

 

 

 

 

 

 

 

The other component’s volume is set to the

Increase the volume level.

 

 

minimum.

 

 

 

 

 

 

 

 

 

 

DAB reception

 

 

 

 

 

 

 

Problem

Cause

Solution

 

 

 

 

 

Cannot tune into any DAB

The antenna may be connected improperly.

Make sure the antenna is connected properly (☞ P. 3).

 

stations.

 

 

 

The initial scan operations were not performed.

Perform the initial scan operations (☞ P. 11).

 

 

 

 

 

 

 

 

There is no DAB coverage in your area.

Check with your dealer or WorldDMB Online at

 

 

 

“http://www.worlddab.org” for a listing of the DAB

 

 

 

coverage in your area.

 

 

 

 

 

 

The DAB signals are too weak.

Change the height, direction, or placement of the antenna.

 

 

 

 

 

The initial scan operations are

The antenna may be connected improperly.

Make sure the antenna is connected properly (☞ P. 3).

 

not successful and “Not Found”

 

 

 

The DAB signals are too weak.

Change the height, direction, or placement of the antenna.

 

appears on the front panel

 

 

 

 

display.

There is no DAB coverage in your area.

Check with your dealer or WorldDMB Online at

 

 

 

“http://www.worlddab.org” for a listing of the DAB

 

 

 

coverage in your area.

 

The DAB station reception is

The antenna may be connected improperly.

Make sure the antenna is connected properly (☞ P. 3).

 

weak.

 

 

 

The DAB signals are too weak.

Change the height, direction, or placement of the antenna.

 

 

 

 

 

 

 

There is noise interference (e.g.

The antenna needs to be repositioned.

 

 

hiss, crackle, or jitter).

 

 

 

The DAB signals are too weak.

 

 

 

 

 

 

 

 

 

The DAB station information

The DAB station may be temporarily out of

Contact the DAB broadcaster.

 

does not appear or is inaccurate.

service, or the DAB station information is not

 

 

 

provided by the DAB broadcaster.

 

 

23 En