USING THE SLEEP TIMER
When the specified time has elapsed, the system will turn off automatically.
Press repeatedly
Press SNOOZE/SLEEP repeatedly to specify the time after which the system will turn off.
You can specify 30, 60, 90 or 120 minutes.
When you select a time, the sleep timer is turned on, and the sleep indicator (
) is shown in the front panel display.
If you press SNOOZE/SLEEP while the sleep timer is activated, the sleep timer setting will be canceled.
ADJUSTING THE TONE (remote control only)
2
3
1 
1 During playback, press the LOW, MID, or HIGH EQ button on the remote control.
Select the tone to be adjusted (LOW, MID, HIGH).
2Press / to adjust the tone.
3Press ENTER on the remote control to
complete the operation.
You can also press the EQ button that you pressed in Step 1 to complete the settings.
If you want to adjust another frequency band, return to step 1 and press the EQ button for the frequency band that you want to adjust.
ADJUSTING THE BRIGHTNESS OF THE FRONT PANEL
DISPLAY (remote control only)
Press repeatedly
Press DIMMER repeatedly on the remote control.
The brightness of the front panel display will change in the order shown below.
AUTO 
1 (bright) 
2 (medium) 
3 (dim) 
back to AUTO
When AUTO is set, the brightness of the front panel display is adjusted automatically with the Illumination sensor (☞ P. 3). Ensure that the sensor is not covered.