USING THE “DTA Controller” APPLICATION FOR THE iPod touch/iPhone/iPad
Switching the alarm on/off
Press ALARM to turn the alarm on/off.
When the alarm is on, the alarm indicator (
) will light, and the alarm time will be shown.
If you press ALARM again, the alarm indicator ( 
) and the alarm will turn off.
When the unit is in power saving, the alarm will not function (☞ P. 5).
Operations while the alarm sound is playing
When the set time arrives, the selected alarm sound will play. During playback, the following operations are available.
To pause the alarm (Snooze)
Press SNOOZE/SLEEP.
Snooze will stop the alarm and play it again 5 minutes later.
If SOURCE + BEEP is set as the alarm type, you can press SNOOZE/SLEEP once to stop the beep sound, and twice to stop the audio source.
Five minutes after the audio source is stopped, it will start fading in again and the beep sound will resume.
To turn the alarm off
Press ALARM or 
.
• You can also stop the alarm by holding down SNOOZE/ SLEEP.
• If you don’t stop the alarm, it will stop automatically after 60 minutes and the system will turn off.
• The alarm setting will be saved even if the alarm is turned off. If the alarm is turned on again by pressing ALARM, the alarm will sound with the previous alarm settings.
USING THE “DTA Controller” APPLICATION FOR THE iPod touch/iPhone/iPad
By using the free “DTA Controller” application for the iPod touch/iPhone/iPad, you can control this unit and make detailed alarm settings. For example, for each day of the week, you can specify the alarm time (Weekly Alarm) and adjust the IntelliAlarm as desired.
The front panel display shows information for the Weekly Alarm you’ve set.
MON | TUE | WED | THU | FRI | SAT | SUN |
|
|
|
|
|
|
|
Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday |
For details of “DTA Controller”, refer to the product information in the Yamaha website.