USING THE ALARM FUNCTION

Setting the alarm

Set the alarm time and alarm type

Alarm settings cannot be made when the unit is in power saving. If you want to use the alarm function, set the rear panel CLOCK switch to the ON position.

1

2

3

Alarm time

   9 : 1 2

  C o m p l e t e d !

Alarm indicator

1Press SET.

The alarm indicator ( ) will blink.

2Set the alarm.

Set items 1-5described below.

Press –/+to select a numerical value, and press ENTER to confirm it.

Items

Setting or range

1ALARM SELECT * This can be selected after you’ve used “DTA Controller” to set the alarm (☞ P. 19). If you’re not using “DTA Controller,” proceed to item 2.

ONE DAY: An alarm that sounds only once at the specified time.

WEEKLY: An alarm whose time can be specified for each day of the week (settable only using “DTA Controller”).

If you’ve chosen WEEKLY, this completes the alarm setting.

2 ALARM TIME

Make settings in the order of hours

 

minutes.

 

 

 

 

 

3 ALARM TYPE

Select from SOURCE+BEEP, SOURCE or BEEP.

 

For details, refer to “3 types of alarms” (P. 17).

 

If you selected BEEP, proceed to item 5.

 

 

 

 

 

4 ALARM SOURCE

iPod:

Play back music from your iPod (Refer to

(If you selected

 

“Various audio sources” (P. 17).)

SOURCE+BEEP or

 

The iPod connected via Bluetooth is not

SOURCE as the

CD:

available. Set the iPod in the iPod dock.

ALARM TYPE)

Play back music from a CD.

 

 

Specify the track number (data CD: folder

 

 

number) (RESUME, 1-99).

 

USB:

Play back music from a USB device.

 

 

Specify the folder number (RESUME, 1-999).

 

DAB/FM:Play a radio station.

 

 

Specify the preset number (RESUME, 1-30).

 

If the selected source cannot be played back at the time

 

set for the alarm (e.g., the iPod is not connected), the beep

 

sound is played back.

 

If you choose RESUME when specifying the track/

 

folder/preset number, the last-played track/folder/station

 

will be played (resume playback).

5ALARM VOLUME Specifies the volume (5-60) of the alarm.

3 Complete the settings.

When you set the VOLUME for item 5, the display will indicate “Completed!” and your settings will be confirmed. This completes the alarm setting.

The alarm will be turned on and the alarm indicator ( ) will light.

•By pressing SET during this procedure, you can confirm the alarm settings with the currently-specified values and complete the procedure.

•If you decide to cancel alarm settings mid-way through the procedure, turn the system off.

18 En