Yamaha 006IPTO-F0, WD83390

Insert Patching 117

DM1000 Version 2—Owner’s Manual

Input & Output Patching

BINSERT section

•ON/OFF.........................This button turns Insert on or off.

•OUT...............................This par ameter enables you to select outputs, slot channels, or

internal effects inputs as the Insert Out destination.

•IN....................................This parameter enables you to select inputs, slot channels, or

internal effects outputs as the Insert In source.

CCOMP section

•ON/OFF.........................This button turns the compressor on or off.

•ORDER..........................This parameter determines the order of Insert patch and com-

pressor when they are inserted at the same signal path point.

With the “COMP → INS” setting, signals pass through the

compressor ﬁrst, then the Insert. With the “INS → COMP” set-

ting, signals pass through the Insert ﬁrst, then the compressor.

3Move the cursor to the OUT parameter box, and rotate the Parameter wheel

or press the [INC]/[DEC] buttons to select the desired outputs, slot channels,

or internal effects inputs to be patched to Insert Out. The parameter indi-

cators are explained below:

4 Press [ENTER] to conﬁrm the change.

If you move the cursor to another parameter box or display another page before you press

the [ENTER] button, all settings on this page will be cancelled.

5Move the cursor to the desired IN parameter box, and rotate the Parameter

wheel or press the [INC]/[DEC] buttons to select the inputs or slot channels

to be patched to the Insert In.

Refer to the explanation regarding the Input Patch for more information on the parameter

values (see page 110).

6 Press [ENTER] to conﬁrm the change.

7To enable the speciﬁed Insert patch, move the cursor to the ON/OFF button

in the INSERT section, and press [ENTER] to turn it on or off.

Parameter values Description

–No assignment

S1-1–S116 Channels 1–16 of Slot 1

S2-1–S216 Channels 1–16 of Slot 2

OMN1–OM12 OMNI OUT connectors 1–12

2D1L & 2D1R 2TR OUT DIGITAL1 (L/R)

2D2L & 2D2R 2TR OUT DIGITAL2 (L/R)

FX1-1–FX1-8 Inputs 1–8 of Internal Effects Processor 1

FX2-1 & FX2-2 Inputs 1 & 2 of Internal Effects Processor 2

FX3-1 & FX3-2 Inputs 1 & 2 of Internal Effects Processor 3

FX4-1 & FX4-2 Inputs 1 & 2 of Internal Effects Processor 4

Tip: Move the cursor to an empty OUT or IN parameter box and press the [ENTER] button.

The Patch Select window appears. Rotate the Parameter wheel or press the cursor buttons to

select an item to be patched and press [ENTER]. Then, move the cursor to the YES button and

press [ENTER]. The selected item is now patched.