Settings

Controlling the sound bar with TV remote control (TV remote control learning function)

You can use the TV remote control to turn on/off the sound bar or adjust its volume by having the sound bar learn the TV remote control signals.

NOTE

•This function is available only when your TV remote control uses infrared signals.

•Depending on the installation conditions or settings of the sound bar, both the sound bar and TV will receive the TV remote control signals and operate simultaneously.

1 Turn off the TV and sound bar.

2 Hold down LEARN on the supplied remote control for more than 3 seconds to set the sound bar to the learning mode.

When the sound bar is in the learning mode, the indicators on the front panel flash as shown below.

3 Make the sound bar learn the volume (–) operation.

3-1Press VOLUME (–) on the front panel of the sound bar.

INPUT

– VOLUME +

 

 

 

 

 

 

 

 

3-2While pointing your TV remote control at the remote control sensor, hold down the volume (–) key for more than 1 second twice or three times.

Approx. 30 cm (1 ft)

TV remote control

VOL

 

 

VOL

VOL

VOL

Hold down

 

Release

Hold down

Release

(more than 1 second)

(more than 1 second)

(more than 1 second)

(more than 1 second)

Result

Bleep/buzzer

Indicators

 

 

Successfully

Once

 

 

 

 

learned

 

 

Lights up

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

Learning has

Twice

Flashes

failed

 

 

 

 

* Repeat from Step 3-1.

4 Make the sound bar learn the volume (+) operation.

4-1Press VOLUME (+) on the front panel of the sound bar.

INPUT

– VOLUME +

 

 

 

 

4-2While pointing your TV remote control at the remote control sensor, hold down the volume (+) key for more than 1 second twice or three times.

Result

Bleep/buzzer

Indicators

Successfully

Once

 

learned

Lights up

 

 

 

Learning has

Twice

Flashes

failed

 

 

 

 

* Repeat from Step 4-1.

5 Make the sound bar learn the power operation.

5-1Press (power) on the front panel of the sound bar.

INPUT

– VOLUME +

 

 

 

 

5-2While pointing your TV remote control at the remote control sensor, hold down the power key for more than 1 second twice or three times.

 

Result

Bleep/buzzer

Indicators

 

 

Successfully

Once

 

 

 

learned

 

Lights up

 

 

 

 

 

 

 

 

Learning has

Twice

 

Flashes

 

failed

 

 

 

 

 

 

 

 

 

* Repeat from Step 5-1.

6

To finish the learning mode, press LEARN or

(power) on the supplied remote

 

control.

 

 

 

This completes the necessary settings. Now you can operate the sound bar with the TV remote control’s power key or volume keys.

HINT

•The learning mode will be finished automatically if no operations are performed for 5 minutes.

•Set the TV volume to minimum. When you turn up the volume of the sound bar with the TV remote control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in “Connections” (p.7) to change the TV setting.