(power) key

Turns on or off (standby) the sound bar.

HINT

•If you turn on the sound bar, the sound bar and subwoofer will be connected wirelessly and the SUBWOOFER indicator on the front panel

of the sound bar will light up. If the indicator does not light up (or remains flashing), change the group ID (p.11).

SUBWOOFER

Flashes (preparing)

SUBWOOFER

Lights up (connection established)

CLEAR VOICE key

Enables/disables the clear voice function. When this function is enabled, you can enjoy clear voice sounds while watching movies, TV dramas, news programs or sports programs.

CLEAR VOICE

Lights up (clear voice is enabled)

UNI VOLUME key

Enables/disables the UniVolume function. When this function is enabled, the sound bar automatically adjusts its volume so that different TV channels, programs and commercials will be played at the same volume.

Decoder indication

The sound bar supports the following audio signals. You can check the type of the input audio signal by the color of the indicator.

 

D

Green (Dolby Digital), Red (DTS Digital Surround)

 

DTS

 

 

 

 

D

Off (PCM)

 

DTS

Auto-sleep function

The sound bar will be automatically turned off when one of the following conditions is met.

SURROUND and STEREO keys

UNI VOLUME

HINT

Lights up (UniVolume is enabled)

• No operations for 12 hours

• No audio input and no operations for 1 hour

• No operations for 10 seconds after a wireless connection (yAired)

to a transmitter (sold separately) is terminated

Switch between surround and stereo (2 channel) playback. When surround playback is selected, you can enjoy a realistic sound effect using Yamaha’s exclusive AIR SURROUND XTREME.

SURROUND Lights up (surround playback)

SURROUND Off (stereo playback)

HINT

•When 2-channel stereo signals are played in surround, the PLII indicator lights up.

PL

Lights up (Dolby Pro Logic II)

MUTE key

Mutes the audio output. Press the key again to unmute.

Flashes (on mute)

•The UniVolume function is automatically disabled when “YIT” is selected as the input source.

AUDIO DELAY key

Adjusts the audio delay to synchronize the sound with the video when the video image on the TV may seem delayed with respect to the sound.

Follow the procedure below to adjust the audio delay.

1Hold down AUDIO DELAY for more than 3 seconds. The left most indicator flashes.

2Press SUBWOOFER to adjust the audio delay.

Smaller delay (–) Larger delay (+)

3 To finish the adjustment, press AUDIO DELAY.

HINT

•The adjustment will be finished automatically if no operations are performed for 20 seconds.

•The audio delay setting does not work when “YIT” is selected as the input source.

9