IMPORTANT SAFETY INSTRUCTIONS

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

4 Compliance with FCC regulations does not guarantee

UNIT!: This product, when installed as indicated in

that interference will not occur in all installations. If this

the instructions contained in this manual, meets FCC

product is found to be the source of interference, which

CAUTION

RISK OF

ELECTRIC

SHOCK DO

NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES- 003.

1Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries

Association’s Consumer Electronics Group

want you to get the most out of your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without

annoying blaring or distortion – and, most importantly, without affecting your sensitive

hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

requirements. Modifications not expressly approved by

can be determined by turning the unit “OFF” and “ON”,

Yamaha may void your authority, granted by the FCC, to

please try to eliminate the problem by using one of the

use the product.

following measures:

2 IMPORTANT: When connecting this product to

5 Relocate either this product or the device that is being

accessories and/or another product use only high quality

affected by the interference.

shielded cables. Cable/s supplied with this product MUST

6 Utilize power outlets that are on different branch (circuit

be used. Follow all installation instructions. Failure to

breaker or fuse) circuits or install AC line filter/s.

follow instructions could void your FCC authorization to

7 In the case of radio or TV interference, relocate/reorient

use this product in the USA.

the antenna. If the antenna lead-in is 300 ohm ribbon lead,

3 NOTE: This product has been tested and found to comply

change the lead-in to coaxial type cable.

with the requirements listed in FCC Regulations, Part

8 If these corrective measures do not produce satisfactory

15 for Class “B” digital devices. Compliance with these

results, please contact the local retailer authorized to

requirements provides a reasonable level of assurance that

distribute this type of product. If you can not locate the

your use of this product in a residential environment will

appropriate retailer, please contact Yamaha Corporation

not result in harmful interference with other electronic

of America A/V Division 6600 Orangethorpe Ave., Buena

devices. This equipment generates/uses radio frequencies

Park, CA 90620.

and, if not installed and used according to the instructions

found in the users manual, may cause interference harmful

9 The above statements apply ONLY to those products

to the operation of other electronic devices.

distributed by Yamaha Corporation of America or its

 

subsidiaries.

•This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.

•Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation.

See the “Troubleshooting” section at the end of this manual if interference to radio reception is suspected.

FCC WARNING

Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

2