Yamaha YJ125T Indicator lights, Handlebar switches, Horn switch “*”, Start switch“,”, Dimmer switch “%/&”, Engine stop switch “#/$”, Turn signal switch “4/6”

INSTRUMENT AND CONTROL FUNCTIONS

EAU10980

Indicator lights

EAU11020

Turn signal indicator light “5”

This indicator light flashes when the turn signal switch is pushed to the left or right.

EAU12342

Handlebar switches

EAU12400

Dimmer switch “%/&”Set this switch to “&” for the high beam and to “%” for the low beam.

EAU12660

Engine stop switch “#/$”

Set this switch to “#” before starting the engine. Set this switch to “$” to stop the engine in case of an emergency, such as when the motorcycle overturns or when the throttle cable is stuck.

			40		2
1		30	50
			60
			80
	20	40	100	60
		20		70
	10		120
		0		80
		MPH

ZAUM00**

1.High beam indicator light ”&”

2.Turn indicator light “5”

EAU11080

High beam indicator light “&”

This indicator light comes on when the high beam of the headlight is switched on.

1

2

3

ZAUM00**

1.Dimmer switch “%/&“

2.Turn signal switch “4/6”

3.Horn switch “*”

EAU12460

Turn signal switch “4/6”

To signal a right-hand turn, push this switch to “4”.To signal a left-hand turn, push this switch to “6”.When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position.

EAU12500

Horn switch “*”Press this switch to sound the horn.

13

2

ZAUM00**

1.Engine stop switch “#/$“

2.Start switch “,”

EAU12700

Start switch“,”

Push this switch while applying the front or rear brake to crank the engine with the starter.

ECA10050

cC

See page 5-1 for starting instructions prior to starting the engine.

3-2