INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
The fuel tank cap cannot be installed unless the key is in the lock. In addi- tion, the key cannot be removed if the cap is not properly installed and locked.
EWA10130
w
3Make sure that the fuel tank cap is properly installed before riding.EAU13210
Fuel
1
ZAUM00**
1. Fuel tank filler tube
Make sure that there is sufficient fuel in the tank. Fill the fuel tank to the bottom of the filler tube as shown.
EWA10880
w
8Do not overfill the fuel tank, oth- erwise it may overflow when the fuel warms up and expands.
8 Avoid spilling fuel on the hot engine.ECA10070
cC
Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts.
EAU13440
Catalytic converter
This vehicle is equipped with a catalytic converter in the muffler.EWA10860
w
The exhaust system is hot after op- eration. Make sure that the exhaust system has cooled down before doing any maintenance work.
ECA10700
cC
The following precautions must be observed to prevent a fire hazard or other damages.
8Use only unleaded gasoline.The use of leaded gasoline will cause unrepairable damage to the cata- lytic converter.
8Never park the vehicle near pos- sible fire hazards such as grass or other materials that easily burn.
8Do not allow the engine to idle too long.