PERIODIC MAINTENANCE AND MINOR REPAIR

1

Cleaning the V-belt case air filter ele-ment

1. Remove the kickstarter lever by removing the bolt.

1

2. Remove the crankcase cover by removing the screws.

2

ZAUM00**

1. Compressed air

ECA10480

cC

8

Make sure that the air filter ele-

 

ment is properly seated in the air

 

filter case.

8

The engine should never be op-

 

erated without the air filter ele-

 

ment installed, otherwise the

 

piston(s) and/or cylinder(s) may

1

3 2

ZAUM00**

1.Kickstarter

2.Bolt

3.Crankcase cover

ZAUM00**

1. Filter element holder

2. Filter element

EWA10430

w

Use only a dedicated parts cleaning solvent. To avoid the risk of fire or 6 explosion, do not use gasoline or solvents with a low flash point.

ECA10520

become excessively worn.

6.Install the air filter case cover by installing the screw.

3.Remove the filter element holder by removing the screw.

4.Pull the air filter element out, and then clean it with solvent. After cleaning, remove the remaining solvent by squeezing the element.

cC

To avoid damaging the air filter ele- ment, handle it gently and carefully, and do not twist it.

5.Apply oil of the recommended type to the entire surface of the sponge material, and then squeeze the ex- cess oil out.

6-9