Using USB Flash Memory

Formatting USB Flash Memory

New USB flash memory must be formatted before they can be used by this instrument.

CAUTION

If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function.

1After connecting the USB flash memory to be formatted to the instrument’s USBTO DEVICE terminal, check that the icon is showing in the MAIN display.2Press the FILE CONTROL [MENU] but- ton.3 Use the CATEGORY [f ] and [r ] buttons to select the Format item.

The display prompts you for confirmation.

5 Press the [EXECUTE] button again, or the [+] button, and the format operation will begin.

CAUTION

Once the format-in-progress message appears on the display the format operation cannot be canceled. Never turn off the power or remove the USB flash memory during this operation.

6 A message will appear on the display to inform you that the operation has fin- ished.

Press the [EXIT] button to return to the MAIN display.

NOTE

If the USB flash memory has been write-protected, an appropriate message will appear on the display and you will not be able to exe- cute the operation.

4 Press the [EXECUTE] button and the display prompts you for confirmation.

You can press the [-] button at this point to cancel the operation.

92 DGX-620/520, YPG-625/525 Owner’s Manual