Yamaha YPP-200 The Dual Mode

17

YPP-200

The Dual Mode

The dual mode makes it possible to play two voices simultaneously across

the entire range of the keyboard.

To activate the dual mode simply press two voice selectors at the

same time (or press one voice selector while holding another). The

voice indicators of both selected voices will light when the dual mode is

active. To return to the normal single-voice play mode, press any single

voice selector.

According to the voice numbering priority as shown in the diagram

on the left, lower valued voice numbers will be designated as the 1st

Voice (the other voice will be designated as the 2nd Voice).

•[EFFECT] in the Dual Mode

Depending upon the conditions one effect type will take priority over the

other. Depth will be decided according to the depth default value of the

voice combination. However, using function F3 (see page 28) you can

change the depth value for each voice as you like.

Effect depth setting via the panel controls (i.e. pressing the [–/NO] or

[+/YES] buttons while holding the [EFFECT] button — see page 19) will

be applied to the 1st Voice only.

•[REVERB] in the Dual Mode

The reverb type assigned to the 1st Voice will take priority over the other.

(If the reverb is set to OFF, the 2nd Voice’s reverb type will be in affect.)

Reverb depth setting via the panel controls (i.e. pressing the [–/NO] or

[+/YES] buttons while holding the [REVERB] button — see page 18) will

be applied to the 1st Voice only.

Other Dual Mode Functions ................................................................

The YPP-200 Function mode provides access to a number of other

dual-mode functions, listed below. See the corresponding pages for

details.

•Dual Balance................................................. 28

•Dual Detune .................................................. 28

•1st Voice Octave Shift................................... 28

•2nd Voice Octave Shift.................................. 28

•1st Voice Effect Depth................................... 29

•2nd Voice Effect Depth.................................. 29

•Reset............................................................. 29

Voice numbering priority

1 2 3 4 5 6 7 8

Contents

Main WARNING: SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: SPECIAL MESSAGE SECTION PLEASE KEEP THIS MANUAL FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! 2. IMPORTANT: When connecting this product to accessories and/ 3. NOTE: OBSERVERA! PRECAUTIONS Power supply/AC power adaptor Location Do not open PLEASE READ CAREFULLY BEFORE PROCEEDING CAUTION Page Introduction Included Accessories Contents The Control Panel Setting Up Selecting & Playing Voices Playing the Demonstration Tunes The Dual Mode Reverb The Control Panel The Control Panel Setting Up Power supply connections Using the OUTPUT R and L/L+R Jacks Using An AC Power Adaptor Z Setting Up Music Stand Using the MIDI IN and OUT Connectors Using the PHONES Jacks Using the Damper Pedal (connect a footswitch to the DAMPER Jack) Selecting & Playing Voices Turn Power On Playing the Demonstration Tunes Engage the Demo Mode Play a Voice Demo Voice Demo Exit From the Demo Mode Engage the Preset Song Mode Play a Preset Song Preset Song Exit From the Preset Song Mode Preset Song A-B Repeat Specify the Beginning (A) of the Phrase Specify the End (B) of the Phrase Stop Playback Preset Song Part Cancel Turn the Desired Part Off Start/Stop Playback Synchro Start Soft Pedal Start/Stop The Dual Mode Other Dual Mode Functions Reverb Adjusting Reverb Depth The Effect Adjusting Effect Depth Touch Sensitivity HARD MEDIUM SOFT FIXED Transposition The Metronome & Tempo Control The Metronome Metronome Time Signature Metronome Volume Function Tempo Control Using the User Song Recorder Recording Make All Necessary Initial Settings Engage the Record Ready Mode Select the Record Track Using the User Song Recorder Start Recording Stop Recording Erasing a Single Track Changing the Initial Settings Playback Using the User Song Recorder Synchro Start Soft Pedal Start/Stop The Function Mode To Select a Function Z X C F1 F2 F2.1: Scale F2.2: Base Note F3 F3.1: Dual Balance F3.2: Dual Detune F3.3: 1st Voice Octave Shift F3.4: 2nd Voice Octave Shift F3.5: 1st Voice Effect Depsth F3.6: 2nd Voice Effect Depth F4 F5 F6 F7 F7.1: MIDI Transmit Channel Selection F7.2: MIDI Receive Channel Selection F7.3: Local Control ON/OFF F7.4: Program Change ON/OFF F7.5: Control Change ON/OFF F7.6: MIDI Transmit Transpose F7.7: Panel/Status Transmit F7.8: Bulk Data Dump F8 F8.2: MIDI F8.3: Tuning F8.4: Pedal F8.1: Voice Using the MIDI Functions What Is MIDI? Using the MIDI Functions Connecting to a Personal Computer Using the MIDI Functions Factory Preset Recall Options Troubleshooting Voice Descriptions Voice Demo Tune Titles Demo and Preset Song List Preset Song Titles Function Factory Setting List MIDI Data Format 3 MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] Data format: [8nH] -> [kk] -> [vv] 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] 5. SYSTEM REALTIME MESSAGES 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] (2) XG Native Bulk Data (reception only) Effect MIDI Map REVERB EFFECT <Table 1> MIDI Parameter Change table ( SYSTEM ) MIDI Implementation Chart Keyboard Stand Assembly Z Assembly Parts X C V B Post-assembly checklist Specifications Limited Warranty 90 DAYS LABOR 1 YEAR PARTS YPP SERIES OF PORTABLE PIANO CONSUMERS RESPONSIBILITIES EXCLUSIONS NORTH AMERICA CENTRAL & SOUTH AMERICA OCEANIA EUROPE AFRICA MIDDLE EAST ASIA