10
YPP-200
Setting UpStereo System
•Before connecting the YPP-200 to other electronic components, turn off the power for all compo-
nents. Before turning the power on or off for all components, set all-volume levels to minimum.
CAUTION
Power supply connections
Using An AC Power Adaptor ..............................................................
The OUTPUT R and L/L+R jacks deliver the output of the YPP-200
for connection to an instrument amplifier, mixing console, PA system,
or recording equipment. If you will be connecting the YPP-200 to a
monaural sound system, use only the L/L+R jack. When a plug is
inserted into the L/L+R jack only, the left- and right-channel signals are
combined and delivered via the L/L+R jack so you don’t lose any of the
YPP-200’s sound.
CAUTION
•When the YPP-200’s OUTPUT jacks are connected to an external sound system,
first turn the YPP-200 power on, and then the power to the external amplifier/
speaker system. Reverse this order when turning the power off.
ZMake sure that the STANDBY/ON switch of the YPP-200 is set to
STANDBY.
XConnect the AC adaptor (PA-5C, PA-5D or other adaptor specifi-
cally recommended by Yamaha) to the power supply jack.
CPlug the AC adaptor into an AC outlet.
CAUTION
•Never interrupt the power supply (e.g. unplug the AC adaptor) during any
YPP-200 record operation! Doing so can result in a loss of data.
WARNING
•Use ONLY a Yamaha PA-5C or PA-5D AC Power Adaptor (or other adaptor
specifically recommended by Yamaha) to power your instrument from the AC
mains. The use of other adaptors may result in irreparable damage to both
the adaptor and the YPP-200.
•Unplug the AC Power Adaptor when not using the YPP-200, or during
electrical storms.
•Plugging or unplugging the AC power adaptor will reset the YPP-200 to the
defaults.
Accessory Jacks
Using the OUTPUT R and L/L+R Jacks ..................................
PA-5C