AUTO SETUP
8Press ENTER to start the AUTO SETUP procedure.
The following screen appears on your TV. ENVIRONMENT CHECK (Environmental noise check), SUB WOOFER CHECK (Subwoofer check) and WILL START in 10 SEC (Will start in 10 sec) are displayed in order as the PREPARATION procedure is in progress.
ENTER
9Check that the following screen is displayed on your TV.
The results of the AUTO SETUP procedure are displayed on your TV.
Example of the
SHOW RESULT screen
SHOW RESULT | SHOW RESULT |
BEAM MODE: 5BEAM | BEAM MODE: 5BEAM |
SUBWOOFER: NOT APPLICABLE | |
[ENTER]:Enter | [ENTER]:Enter |
[RETURN]:Cancel | [RETURN]:Cancel |
If you selected BEAM | If you selected BEAM |
OPT+SOUND OPTIMZ or | OPTIMZ only in step 5. |
SOUND OPTIMZ only in |
|
step 5. |
|
PREPARATION
.ENVIRONMENT CHECK
;;;[OK]
SUB WOOFER CHECK
;;;[NOT IN USE]
WILL START in 10 SEC
Move aside or behind YSP
If you selected BEAM OPT+SOUND OPTIMZ or SOUND OPTIMZ only in step 5.
PREPARATION
.ENVIRONMENT CHECK
;;;[OK]
WILL START in 10 SEC
Move aside or behind YSP
If you selected BEAM OPTIMZ only in step 5.
10Press ENTER to confirm the results or press RETURN to cancel the results.
The following screen is displayed temporarily for a few seconds and then disappear from your TV.
AUTO SETTING COMPLETED
ENTER
AUTO BEAM OPTIMIZATION
AUTO BEAM MEASUREMENT/SET
Skipped if you selected SOUND OPTIMZ only in step 5.
ACOUSTIC OPTIMIZATION
.SETTING VOLUME
MEASURE DISTANCE
MEASURE FREQ CHAR
MEASURE VOLUME
Skipped if you selected BEAM OPTIMZ only in step 5.
If an error occurs, an error message is displayed. See “Error messages for AUTO SETUP” on page 35 for a complete list of error messages and their proper remedies. Follow the instructions and press RETURN to perform the AUTO SETUP procedure again.
34