Using MANUAL SETUP
Use the remote control to access and adjust each parameter.
INPUTMODE SLEEP
YSP
5BEAM | ST+3BEAM | 3BEAM |
1 | 2 | 3 |
STEREO | TARGET |
|
4 | 5 | 6 |
MUSIC | MOVIE | VOL MODE |
7 | 8 | 9 |
SPORTS | OFF | SURROUND |
0 | +10 |
|
CH LEVEL | CINEMA DSP | MENU |
| ||
| ENTER |
|
TEST |
| RETURN |
y
You can adjust the SET MENU parameters while the unit is reproducing sound.
1Press YSP on the remote control to switch to the operation mode of this unit.
YSP
2Press MENU on the remote control.
The SET MENU screen appears on your TV.
| SET MENU |
MENU | .;MEMORY |
| ;AUTO SETUP |
| ;BASIC SETUP |
| ;MANUAL SETUP |
| []/[]:Up/Down |
| [ENTER]:Enter |
y
•The control buttons used for SET MENU are displayed on the bottom of the screen.
•To return to the previous screen while using SET MENU, press RETURN on the remote control.
•To resume cursor button operations after changing the control area by pressing an input selector button, press TEST on the remote control.
•To cancel the SET MENU screen, press MENU once more.
•You can also perform the following operations in the front panel display.
•If you press an input selector button during the SET MENU operations, the cursor buttons become ineffective. In this case, press TEST once.
MANUAL SETUP
3Press 
/ 
to select MANUAL SETUP and then press ENTER.
The following screen appears on your TV.
ENTER
ENTER
;MANUAL SETUP
.1 SOUND MENU 2 BEAM MENU
3 INPUT MENU
4 DISPLAY MENU
[]/[]:Up/Down
[ENTER]:Enter
4Press 
/ 
to select a sub menu and then press ENTER.
ENTER | ENTER |
5Press 
/ 
/ 
/ 
and ENTER to configure each parameter.
ENTER
6Press MENU to exit.
The OSD disappears from your TV screen.
MENU
OPERATION | ADVANCED |
|
|
69