TROUBLESHOOTING

■ Remote control

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control does not work

Wrong distance or angle.

The remote control will function within a

24

and/or function properly.

 

maximum range of 6 m and no more than

 

 

 

30 degrees off-axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

—

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

24

 

 

 

 

You cannot operate external

The external component you want to

Press INPUT on the front panel or the

39

components with this unit’s

operate is not selected as the input

input selector buttons on the remote

 

remote control.

source.

control to select the external component

 

 

 

you want to operate.

 

 

 

 

 

 

The remote control code was not

Set the remote control code correctly or

87

 

correctly set.

try another code for the same

 

 

 

manufacturer using the “LIST OF

 

 

 

REMOTE CONTROL CODES” at the

 

 

 

end of this manual.

 

 

 

 

 

 

Even if the remote control code is

Use the remote control supplied with the

—

 

correctly set, there are some models that

external component.

 

 

do not respond to the remote control.

 

 

 

 

 

 

The cursor buttons do not work

You pressed an input selector button.

Press TEST once.

—

during SET MENU operation.

 

 

 

 

 

 

 

94