Yamaha YSP-1000 Using the TV macro

REMOTE CONTROL FEATURES

Using the TV macro

The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button.

Notes

•The ways to set macros differ if your TV does not have the tuning capability.

•If you press any control buttons on the remote control other than the ones used to set macros while setting macros, the setting procedure is automatically canceled.

•If it takes more than 10 seconds in steps 2 and 3, the setting procedure is automatically canceled. In this case, repeat from step 1.

STANDBY/ON		POWER		POWER
		AV		TV
DVD	VCR	STB		TV
		TV
INPUT1		INPUT2		MACRO
AUX
		INPUTMODE		SLEEP
YSP
5BEAM	ST+3BEAM		3BEAM
1		2		3
STEREO	TARGET
4		5		6
MUSIC	MOVIE		VOL MODE
7		8		9
SPORTS		OFF	SURROUND
0	+10
CH LEVEL	CINEMA DSP			MENU
	ENTER
TEST				RETURN
VOLUME		CH		TV VOL

MUTE TV INPUT TV MUTE

CODE SET

■Setting macros for the TV with the tuning capability

1Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for.

Proceed to step 2 while holding down CODE SET.

TV MUTE	DVD	VCR	STB	TV
CODE SET	AUX

2Press MACRO on the remote control while holding down CODE SET.

TV MUTE	MACRO
CODE SET

3Press CH +/– or the numeric buttons to select the TV channel.

Check that the TV screen changes to the tuner screen.

	5BEAM	ST+3BEAM	3BEAM
CH	1	2	3
	STEREO	TARGET
or	4	5	6
	MUSIC	MOVIE	VOL MODE
	7	8	9
	SPORTS	OFF
	0	+10

CINEMA DSP

4Press TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1.

TV INPUT

5Press ENTER on the remote control to confirm the macro setting.

ENTER

90