CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
•Connect the main speakers to the speaker output terminals of the amplifier.
•Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
•To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal.
Using one unit
Left speaker | This unit |
Right speaker
OUTPUT | INPUT2 |
TO SPEAKERS
FROM AMPLIFIER
INPUT1
AUTO
STANDBY
LOW HIGH
OFF
PHASE BASS
NOM REV MOVIE MUSIC
To AC outlet | ‹YAMAHA DSP amplifier› | Pin plug |
cords | ||
| SUBWOOFER |
|
Amplifier | ‹Amplifier› |
|
PRE OUT
Using two units
Left speaker
Right speaker
OUTPUT | INPUT2 AUTO | PHASE | BASS |
TO SPEAKERS | STANDBY |
|
|
| LOW HIGH | NOM REV | MOVIE MUSIC |
FROM AMPLIFIER | OFF |
|
|
INPUT1 |
|
|
|
This unit | This unit |
| |
OUTPUT | INPUT2 |
TO SPEAKERS
FROM AMPLIFIER
INPUT1
Amplifier
AUTO
STANDBY
LOW HIGH
OFF
PHASE BASS
NOM REV MOVIE MUSIC
Pin plug cords
To AC outlet | To AC outlet |
Notes on the above connections
•When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound.
•When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
•For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 4.)
6
