E

403033

301052

qq

301053*

q

313024

EMU00157

TILT SUPPORT LEVER

To keep the outboard motor in the tilted- up position, lock the tilt support lever to the clamp bracket.

EMU01180*

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull up the front and rear lock levers. Then lift off the cowling. When replacing the cowl- ing, check to be sure it fits properly in the rubber seal. Then lock the cowling again by moving the levers downward.

cC

The air intake grills 1 on the top cowling are not designed as handles and may break if used as such.

EMU01146

FLUSHING DEVICE

This device 1 is used to clean the cooling water passages of the motor using a garden hose and tap water.

NOTE:

Refer to “Cleaning Cooling-water Passages” in Chapter 4 for instructions on usage.

2-19