E

UP

UP

 

DN

DN

 

702014

EMU00294*

PROCEDURE FOR TILTING UP

Power trim/tilt model

1)If there is a fuel joint or a fuel cock on the boat, disconnect the fuel line or close the fuel cock.

2)Push the power trim/tilt switch “UP” until the outboard has tilted up com- pletely.

DN

UP

702042**

403035*

411043

3)Turn the tilt-support lever toward you and support the engine.

w

After tilting the engine, be sure to support it with the tilt-support lever. Otherwise, the engine could fall back down suddenly if oil in the power trim/tilt unit should lose pressure.

4)Once the engine is supported with the tilt-support lever, push the power trim/tilt switch DOWN to retract the trim rods.

cC

Be sure to retract the trim rods completely during mooring. This protects the rods from marine growths and corrosion which could damage the power trim/tilt mechanism.

3-22