Do not use fuel mixed with oil during break-in or under any circum- stances.
EMU01494
BREAKING IN (RUNNING IN)
ENGINE
Your new engine requires a period of break-in (running-in) to allow mating surfaces of moving parts to wear-in evenly. Correct break-in (running-in) will help ensure proper performance and longer engine life.
cC
8Failure to follow the break-in (running- in) procedure may result in reduced engine life or even severe engine dam- age.
8Do not use pre-mixed fuel in this engine as it may cause carbon deposits on the fuel injector thereby causing
000106 engine trouble.
8Follow the instructions for breaking- in/running-in carefully.
Break-in (running-in) time:10 hours
NOTE:
The label pictured at left is to be left on the top cowling until the break-in (run- ning-in) procedure has been completed and may be removed afterwards.
EMU01195
Run the engine under load (in gear with a propeller installed) as follows.
1)First 10 minutes:
Run the engine at the lowest possi- ble-speed. A fast idle in neutral is best.
