E

Do not use fuel mixed with oil during break-in or under any circum- stances.

EMU01192*

BREAKING IN (RUNNING IN)ENGINE

Your new engine requires a period of break-in (running-in) to allow mating surfaces of moving parts to wear-in evenly. Correct break-in (running-in) will help ensure proper performance and longer engine life.

cC

8 Failure to follow the break-in (running- in) procedure may result in reduced engine life or even severe engine dam- age.

8 Do not use pre-mixed fuel in this engine as it may cause carbon deposits on the fuel injector thereby causing

000106 engine trouble.8 Follow the instructions for breaking- in/running-in carefully.

Break-in (running-in) time: 10 hours

NOTE:

The label pictured at left is to be left on the top cowling until the break-in (run- ning-in) procedure has been completed and may be removed afterwards.

EMU01183*

Run the engine under load (in gear with a propeller installed) as follows.

1)First 10 minutes:

Run the engine at the lowest possi- ble-speed. A fast idle in neutral is best.

3-4