E

q

w e

EMU01172

CLEANING COOLING-WATERPASSAGESFlushing device equipped model

Perform this procedure right after operation for the most thorough flushing.

1) After shutting off the engine, unscrew the garden-hose connector 2 from the fitting 1 on the bottom cowling.

 

 

2) Screw the garden-hose connector 2

 

 

onto a garden hose 3 which is con-

 

 

 

nected to a fresh-water supply.

 

 

3) With the engine off, turn on the water

 

 

tap and let the water flush through

 

 

the cooling passages for about 15

 

 

minutes. Turn off the water and dis-

 

 

connect the garden hose 3.

 

 

4) When flushing is complete, reinstall

 

 

the garden-hose connector 2 on the

 

 

fitting 1 on the bottom cowling.

 

 

Tighten the connector securely.

 

 

cC

 

 

 

Do not leave the garden-hose connector

 

 

loose on the bottom cowling fitting or let

 

 

the hose hang free during normal opera-

 

 

tion. Water will leak out of the connector

 

 

instead of cooling the engine, which can

 

 

cause serious overheating. Be sure the

 

 

connector is tightened securely on the fit-

000876

 

ting after flushing the engine.

 

 

 

 

 

 

NOTE:

8 When flushing the engine with the boat in the water, tilting up the engine until it is completely out of the water will achieve better results.

8 Refer to cooling system flushing instructions in “TRANSPORTING AND STORING OUTBOARD MOTOR”.

4-29