Yamaha CONNECTORS, WATER LEAKAGE, REPLACING FUSE, EXHAUST LEAKAGE, CHECKING WIRING AND

E

r

e e

w

t	r
q	000500
t

000501

413016

EMU01310

REPLACING FUSE

If a fuse has blown, remove the electrical cover, open the fuse holder and remove the fuse with a fuse puller. Replace it with a spare one of proper amperage.

w

Be sure to use the specified fuse. An incorrect fuse or a piece of wire may allow excessive current flow. This could cause electrical system damage and a fire hazard.

NOTE:

If the new fuse blows again immediately, consult a Yamaha dealer.

1Electrical cover

2 Fuse holder

3 Fuse (20A ⋅ 3, 30A ⋅ 1, 80A ⋅ 2) 4 Spare fuse (20A, 30A, 80A)

5 Fuse puller

EMU00383

CHECKING WIRING ANDCONNECTORS

1)Check that each grounding wire is properly secured.

2)Check that each connector is engaged securely.

EMU00384

EXHAUST LEAKAGE

Start the engine and check that no exhaust leaks from the joints between the exhaust cover, cylinder head and crank case.

EMU00385

WATER LEAKAGE

Start the engine and check that no water leaks from the joints between the exhaust cover, cylinder head and crank case.

4-19