Yamaha NOTE:, Filling Fuel Tank, STORING OUTBOARD MOTOR, Otherwise, the oxygen sensor for, 8 Do not use any chemical goods con, taining Silicon, Phosphorus or Lead

E

EMU01187*

		STORING OUTBOARD MOTOR
		When storing your Yamaha outboard for
		prolonged periods of time, (2 months or
		longer), several important procedures
		must be performed to prevent expensive
		damage. This is especially important for
		your Yamaha oil injection system-
		equipped outboard due to the lean oil
		ratios used at idle prior to shutting the
		engine off for the season.
		It is advisable to have your outboard ser-
		viced by an authorized Yamaha dealer
		prior to storage. However, the following
q		procedures can be performed by you, the
		owner, with a minimum of tools.
		cC
		8 Do not use any chemical goods con-
		taining Silicon, Phosphorus or Lead.
	000100
		Otherwise, the oxygen sensor for

Electronic Fuel Injection system could be damaged. For the detail, consult your Yamaha dealer to use chemical goods for storage.

8 Drain the remaining gasoline from the vapor separator. Gasoline left in the vapor separator 1 for a prolonged period of time will break down and possibly cause damage to the fuel line.

EMU00335

Filling Fuel Tank

Fill the fuel tank with fresh fuel and add one ounce of “Yamaha Fuel Conditioner and Stabilizer” (Part No. LUB-FUELC-12- 00) to each gallon of fuel.

NOTE:

The use of “Yamaha Fuel Conditioner and Stabilizer” eliminates the need to drain the fuel system. Consult your Yamaha dealer or other qualified mechanic if the fuel system is to be drained instead.

4-5