Step 3. Tighten wing nuts.
HERE
Step 4. Raise complete handle assembly until it clicks into place. Make sure not to kink the control cables.
Handle Assembly
|
| K |
| IC | |
L |
| |
C |
|
|
Control Cables
Step 5. | Pinch lower handle against mounting | Step 7. Attach control cables to handle with pull | |||
| bracket with pliers. | ties found on the handle. | |||
Step 6. | Move hairpin clip from outer to inner |
|
|
|
|
|
|
|
| ||
| hole on handle mounting bracket. |
|
|
|
|
|
|
|
| ||
|
| HERE |
PINCH HERE
Step 8. Loosen the wing nut holding the rope guide to the upper handle.
Step 9. Squeeze the blade control handle against the upper handle and pull out starter rope, slowly!
Step 10. Thread starter rope into rope guide.
Step 11. Tighten wing nut.
SQUEEZE
Blade Control Handle
Wing Nut
Upper Handle
Look Here
Starter Rope
Rope Guide
9