SECTION 3: KNOW YOUR TRIMMER
Fuel Cap | START/ON (I) | On/Off Stop |
| Control | |
|
|
Choke Control
Primer Bulb
Shaft Grip
STOP/OFF (O) | |
|
Throttle
Control
Air Filter/ | Cutting Attachment | Shaft |
Muffler Cover | ||
| Shield | Housing |
Muffler |
|
|
Spark |
| Cutting Attachment |
Plug |
| |
|
|
Line Cutting Blade 
Figure 5
Read this operator’s manual and safety rules before operating your trimmer. Compare illustrations in Figure 5 with your trimmer to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
Application
Use this unit for cutting grass and light weeds. Also for edging and decorative trimming around trees, fences, etc.
Throttle Control
The throttle control trigger is located below shaft grip. It controls the engine speed. See Figure 5.
On/Off Stop Control
The On/Off Stop control switch is located on the left side mounting bracket. It is used to turn the unit on and off. The switch must be in the START position to start the unit. See Figure 5.
Choke Control
The choke control is located above the air filter/muffler cover. It is used to enrich the fuel mixture when starting a cold engine. See Figure 5.
Primer Bulb
The primer bulb is located to the left of the air filter/muffler cover. It is used to draw fuel into the carburetor when starting a cold engine or after refueling the unit. See Figure 5.
Shaft Grip and D-Handle
Used to grip the unit during operation. See Figure 5.
Cutting Attachment Shield
Protects operator from thrown debris. Contains line
Cutting Attachment
Consists of a reel housing, reel, spring, Bump Knob, and cutting line. See Figure 5.
7
