TROUBLESHOOTING

UNIT WILL NOT START

C A U S E

A C T I O N

Unit is unplugged

Check cord to make sure it is plugged into an electrical outlet

Starter button or bail were improperly used

Press in starter button, hold it, and hold bail

Overload protection switch has popped out

Push it in and follow the Starting Instructions

 

 

MOTOR IS ON, BUT ROTOR WILL NOT TURN

C A U S E

A C T I O N

Belt is damaged

Replace the belt, according to Inspecting/Replacing the

 

Driver Belt

 

 

UNIT LEAVES A THIN LAYER OF SNOW ON PLOWED SURFACES

C A U S E

A C T I O N

Scraper is worn

Replace the scraper

 

 

If further assistance is required, contact your authorized service dealer

SPECIFICATIONS

 

 

 

 

 

MOTOR*

 

Motor type..........................................................................................................................................

A.C.,120 Volts Electric

Operating RPM.........................................................................................................................................

up to 14,000 rpm

Ignition Switch.................................................................................................................................

Bail Lock Safety Button

Amperage...............................................................................................................................................................

8.5 amps

Overload Protection ...........................................................................................................................

120V, 15 amp Breaker

 

 

DRIVE SHAFT ASSEMBLY AND SNOW THROWER UNIT*

 

Handles ...............................................................................................................................................................

Steel Tube

Approximate Unit Weight ...............................................................................................................................

20 lbs. (9 kg.)

Snow Depth (maximum) ..................................................................................................................

6 inches (0.152 meters)

Cleared Path Width........................................................................................................................

12 inches (0.318 meters)

*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

13