RULES FOR SAFE OPERATION
•Do not use on a gravel surface or crushed rock surfaces. Use extreme caution when crossing gravel/crushed rock drives, walks, or roads.
•Clear snow from slopes by going up and down. Never go across the slope. Use caution when changing directions. Never clear snow from steep slopes.
•Never attempt to use the snow thrower on a roof or any steep, inclined, slippery surfaces.
•Never operate snow thrower without proper guards, plates or other safety protective devices in place.
•Never operate the snow thrower near glass enclosures, automobiles, trucks, window wells, dropoffs, etc. without proper adjustment of the snow discharge angle. Keep children and pets away.
•Don’t force or overload the snow thrower. The snow thrower will perform at its best and safest when it is run at the rate for which it was designed.
•Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing up.
•Never direct discharge towards people or allow anyone in front of the unit while operating.
•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing protection when operating this unit.
•Use the unit only in daylight or good artificial light.
•Avoid accidental starting. Remain in the starting position whenever starting the unit. The operator and unit must be in a stable position while starting. See Starting/Stopping Instructions.
•Use the right tool. Only use this tool for the purpose intended.
•Do not overreach. Always keep proper footing and balance.
•Always hold the unit with both hands when operating. Keep a firm grip on handles or grips.
•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the rotor when it is rotating.
•If the rotor will not rotate freely due to frozen ice, thaw the unit thoroughly before attempting to operate it under power.
•Keep the rotor clear of debris.
•Never attempt to clear the rotor with the motor running. Turn the motor off first and unplug the extension cord.
•Keep clothing and body parts away from the rotor.
•Do not operate the motor faster than the speed needed. Do not run the motor at high speed when not
clearing snow.
•Always stop the motor when clearing snow is delayed or when walking from one location to another.
•Disengage power to the rotor when snow thrower is transported or not in use.
•After striking a foreign object, turn the unit off and inspect the snow thrower for damage. Unplug the unit. Repair damage before restarting and operating the unit.
•If the unit should start to vibrate abnormally, stop the unit and check immediately for the cause. Vibration is generally a warning of trouble.
•Stop the motor and unplug the unit whenever you leave the operating position, before unclogging the rotor or discharge vanes, and when making any repairs, adjustments, or inspections.
•Never discharge snow onto public roads or near moving traffic.
•Let the snow thrower run for a few minutes after clearing snow so moving parts do not freeze.
•Use only original equipment manufacturer replacement parts and accessories for this unit. These are available from your authorized service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user or damage to the unit, and void your warranty.
•Do not use the unit in the hand held position. Do not pick up the unit when it is powered and running. The unit is designed to travel along the ground.
OTHER SAFETY WARNINGS•Be sure to secure the unit while transporting.
•Store the unit in a dry area, locked up or up high to prevent unauthorized use or damage, out of the reach of children.
•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use, see Cleaning and Storage instructions.
•If the labels on the unit become defaced or start lifting off, contact your authorized service dealer.
•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.
•Maintain snow movers with care. Follow instructions for lubricating and changing accessories.
SAVE THESE
INSTRUCTIONS
5