Yard Machines OEM-190-032 warranty Model Series 600-649 All 800 series Cub Cadet 11C & 13C

4

Assembly

Model Series

600-649 &

All 800 series

Cub Cadet 11C & 13C

WARNING

Before installing attachment, place tractor on a firm and level surface. Place the PTO in

the disengaged

(OFF) position, set the parking brake, shut engine off and remove key to prevent unintended starting.

Mounting the Idler Assembly

(42, 46, 50, 54 inch Decks

with Electric PTO)

If you’re mounting this snow thrower attachment to a tractor equipped with any deck other than a 42, 46, 50 or 54-inch deck with electric PTO, proceed to Mounting

the Undercarriage Assembly (all tractors).

However, if you’re mounting this snow thrower attach- ment to a tractor equipped with a 42, 46, 50 or 54-inch deck with electric PTO, proceed as follows:

NOTE: If you engage your tractor’s cutting deck by using your left hand to pivot a lever forward, your tractor has a Manual PTO. If you engage your tractor’s cutting deck by pulling outward on a small knob located on the tractor’s dash, your tractor has an Electric PTO.

1.Remove the flange nut and washer noted in Figure 8, which secures the double-idler bracket to the undercarriage. Leave the Shoulder Spacer in place.

2.Attach the idler assembly (packaged separately) over the hex screw and shoulder spacer on the surface of the undercarriage. See Figure 8.

3.Fasten the idler bracket to the undercarriage with the hardware just removed. See Figure 8.

4.Attach one end of the extension spring (732-0594A) to the hole in the idler assembly just mounted and the opposite end of the extension spring to the keeper pin as illustrated in Figure 8.

5.Position the upper v-belt (754-0371A) as illustrated in Figure 9.

NOTE: For a complete detailed diagram of how to route the upper v-belt, see Routing The Upper Drive Belt beginning at the top of page 18.

NOTE: Proceed to the top of page 12 for continued installation instructions for the 600, 800, 11C & 13C model series.

Extension Spring

Flange Lock Nut

& Flat Washer

Idler Bracket & Pulley Shoulder Spacer

Figure 8

Upper V-belt (754-0371A)

Figure 9

10