MAINTENANCE
FILTERS — The filters must be replaced as often as necessary to assure good air flow and filtering action.
Refer to the unit dimension detail (Figure 9) for the location of the filter access panel.
EVAPORATOR COIL — Do not allow dirt to accumulate on the evaporator coil or other parts of the evaporator air circuit. Clean as often as necessary to assure good system performance. Use a brush, vacuum cleaner attachment or other suitable means.
LUBRICATION — The bearings for the blower shaft and the blower motors are permanently lubricated and should not require additional lubricant.
DRAIN PAN — The drain pan should be inspected regu- larly to assure proper drainage.
BELTS — Maintain belt tension to extend belt life. Re- place when signs of failure begin to appear.
Unitary Products Group |
|
P.O. Box 1592, York, Pennsylvania USA |
|
Subject to change without notice. Printed in U.S.A |
|
Copyright ♥ by York International Corporation 1994. All Rights Reserved. |
|