York TCHD18 THRU 60 warranty Listed

TECHNICAL GUIDE

HORIZONTAL DISCHARGE AIR CONDITIONERS

13 SEER – R-410A

MODELS: TCHD18 THRU 60

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

LISTED

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com Additional rating information can be found at

www.ahridirectory.org

WARRANTY

Standard 5-year limited parts warranty. Standard 510-year limited compressor warranty.

Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replace- ment or closing for new home construction.

556454-YTG-A-0210

DESCRIPTION

The 13 SEER Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custom- matched with one of UPG’s complete line of evaporator sec- tions, with each serving a specific function. Matching Air Han- dlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-On coils are available for use with upflow, downflow, or horizontal furnaces and air handlers.

FEATURES

•Performance - Efficiency levels from 13.0 SEER/11.5 EER with a loose coil and up to 15.5 SEER/13.5 EER when cou- pled with a variable speed indoor blower.

•Easy to Install - Compact “slim-line” design allows for easy installation in tight spaces. Units can be stacked.

•Lower Installation Cost - Installation time and costs are reduced by easy power and control wiring connections. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping.

•Quiet Operation - Levels as low as 67 dBA. High efficiency scroll compressor and swept wing fan design reducing oper- ating sound to a mere whisper.

•State Of The Art Coil Technology - Micro-channel (MC2) aluminum coil technology provides enhanced capacities and efficiencies plus the benefit of maximum corrosion protection especially in coastal applications (up to 7 times greater cor- rosion resistance than conventional copper tube and alumi- num fin coils).

•Compressor Protection - The compressor is internally pro- tected against high pressure and temperature. This is accomplished by the simultaneous operation of high pres- sure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liq- uid line filter-drier further protects the compressor.

•Durable Cabinet - Heavy-gage steel cabinet and a tubular base rail provide added support.

•Durable Finish - Automotive quality finish provides the ulti- mate protection from harmful U.V. rays and rust creep ensur- ing long-lasting high quality appearance. A powder-paint topcoat is applied over a baked-on primer, using a galva- nized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater dura- bility than conventional powder-coat finishes.

•Aesthetic - Powder paint “Champagne” Color provides an attractive retail finish.

•Low Maintenance - Long life permanently lubricated motor- bearings need no annual servicing.

•Easy Service Access - Fully exposed refrigerant connec- tions and a single panel covering the electrical controls make for easy servicing of the unit.

•Secured Service Valve - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

•Other Features:

-Factory supplied filter drier

-High pressure switch, low pressure switch

-Accumulator and crankcase heater in all sizes

-Up to 200’ line set out of the box

-Zero lot line clearances (6” clearance in either direction)

•Agency Listed - U.L. and C.U.L. listed - approved for out- door application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE