Rear View Dimensions | York WR 180 specification

262292-YTG-C-0707

40-3/8"

EVAPORATOR

SECTION

DOT PLUG (For pressure drop reading)

FILTER

ACCESS

		SUPPLY
		AIR
		RETURN
		AIR
COMPRESSOR
ACCESS
SUPPLY AIR		18-5/8"
ACCESS		18-5/8"
Dimensions listed are for side		27-3/4"
Dimensions listed are for side	RETURN AIR	5-1/8"
duct flange openings; see	RETURN AIR	5-1/8"
duct flange openings; see	ACCESS
Field Accessories for Side	REAR
Duct Flange Kit.	REAR
Duct Flange Kit.	VIEW
	VIEW

OUTDOOR AIR

39-5/8"

40-1/2"

1" NPT FEMALE COND. DRAIN CONNECTION

OUTDOOR AIR

COMPARTMENT

ACCESS

FIGURE 13:REAR VIEW DIMENSIONS

NOTE:Units are shipped with the bottom duct openings covered. An accessory flange kit is available for connecting side ducts.

For bottom duct applications:

1.Remove the side panels from the supply and return air compartments to gain access to the bottom supply and return air duct covers.

2.Remove and discard the bottom duct covers. Duct openings are closed with sheet metal covers except when the unit includes a power exhaust option. The covering consists of a heavy black paper composition.

3.Replace the side supply and return air compartment panels.

For side duct applications:

1.Replace the side panels on the supply and return air compartments with the side duct flange accessory kit panels.

2.Connect ductwork to the flanges on those panels.

Unitary Products Group

WR 180 specifications

The York WR 180 is a state-of-the-art water-cooled chiller, renowned for its efficiency, flexibility, and reliability in various applications. Designed specifically for commercial and industrial use, the WR 180 stands out as an ideal solution for facilities requiring effective climate control, such as hotels, hospitals, shopping malls, and large office buildings.

One of the primary features of the York WR 180 is its advanced chiller design, which incorporates variable speed technology. This allows the unit to adjust its cooling capacity based on the actual load demands of the building, leading to significant energy savings. By operating at variable speeds instead of a fixed rate, the chiller minimizes energy consumption during lower demand periods while maintaining optimal performance during peak loads.

The WR 180 also employs a reliable and efficient centrifugal compressor, which contributes to its high energy efficiency ratio (EER). This compressor is designed to provide robust cooling while operating quietly, making it suitable for environments where noise reduction is essential. Additionally, the unit features a microprocessor-based control system that offers sophisticated monitoring and control capabilities, allowing operators to fine-tune performance and enhance reliability.

Another notable characteristic of the York WR 180 is its environmentally friendly refrigerant options. The chiller can operate with refrigerants that have a low global warming potential (GWP), aligning with international regulations and environmental sustainability goals. This commitment to eco-friendly designs not only helps reduce the carbon footprint but also ensures compliance with industry standards.

In terms of installation and maintenance, the WR 180 is designed for user-friendliness. Its modular design simplifies transport and installation in various spaces, while easy-access components facilitate routine maintenance. The chiller also offers various connectivity options, enabling integration with building management systems for real-time monitoring and control.

Overall, the York WR 180 combines innovative design, cutting-edge technology, and eco-friendly practices, making it a top choice for industries seeking efficient and sustainable cooling solutions. Its impressive features, coupled with strong operational flexibility, position the WR 180 as a leader in the chiller market.

York WR 180 warranty Rear View Dimensions

Models: WR 180