9.Installation- AMD (Athlon 64-754)
1)Fasten Nipples
Locate the backplate on the bottom of the mohterboard under the CPU socket, then fasten the nipples as shown on the right.
When installing CNPS7000A on Athlon 64,Retention Frame is not needed.
M/B
Nipple
Big Hole
Washer
Backplate
2)Apply Thermal Grease
Spread thermal grease thinly and evenly over the CPU core.
3)Insert Bolts
Insert the bolts into the outer holes on the clip.
4)Fasten Bolts
Place the FHS on the center of the CPU. Screw in both bolts in an alternating fashion until they are completely tightened.
CPU (IHS)
Thermal Grease
Bolt
Outer Hole
Inter Hole
Clip
5)Supply Power
Connect FAN MATE 1 between the motherboard and the fan.
¢Q;À@
@À;Q¢
Mainboard
FAN MATE 1
Speed Control Knob
@@@@@ÀÀÀÀÀ;;;;;QQQQQ¢¢¢¢¢ @@@@ÀÀÀÀ;;;;QQQQ¢¢¢¢
(CNPS7000A)
7
