Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi DWS 935 Adjusting the worktop, Fitting under a counter, Levelling, Proceed as follows

Models: DWS 935

1 24

Download 24 pages 60.33 Kb

Page 23

Adjusting the worktop

Adjusting the worktop

You can move the worktop forward or backward by 25

mmin order to align the machine with other kitchen units.

Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN26

570⎟

600

820

600

IN05

23

INS18en

Image 23

Zanussi DWS 935 Adjusting the worktop, Fitting under a counter, Levelling, kitchen worktop or sink, Proceed as follows

Contents

152985 33/0 DISHWASHER DWSINSTRUCTION BOOKLET Using your appliance ContentsFor the installer Important safety informationDuring Use Important safety informationInstallation Child SafetyDoor handle On/Off indicator lightDescription of the appliance The control panelBefore use Setting the water softenerTo adjust the water softener To fill Filling with saltOnly use salt specifically designed for use in dishwashers Ensure that the lid is closed after every refill Adjusting the doseRinse aid Filling with rinse aidThe lower basket Using your applianceTake care when loading or unloading sharp items such as knives Loading your applianceTo move to the higher position proceed as follows Adjusting the height of the upper basketThe upper basket Before closing the door, ensure that the spray arms can rotate freelyOnly use detergents specifically designed for use in dishwashers If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Use of detergentFor best washing and drying results When buying new dishes, ensure that they are dishwasher proofHints and tips To save energyStarting position Washing programmesProgramme Degree of soil2. Check that there is rinse aid and salt 3. Load the dishes 10. Switch off the dishwasherOperating sequence 1. Check the filtersCleaning the large filter Maintenance and cleaningInternal cleaning Cleaning the central filterMoving the machine External cleaningFrost precautions Prolonged periods of non-operationSomething not working SymptomSolution The dishes are not clean08705 Service and spare partsCustomer Care Department This guarantee does not cover Guarantee conditionsStandard guarantee conditions European GuaranteeHints for test centres Technical specificationsThe locknut must be correctly fitted to avoid water leaks Installation instructionsWater supply connections Remove all packaging before positioning the machineWater outlet hose connection This appliance complies with the following E.E.C. Directives Electrical connectionGreen and Yellow -Earth Blue-Neutral Brown-Live Proceed as followskitchen worktop or sink Adjusting the worktopFitting under a counter Levelling