Problem
Possible cause
Plug is not connected to the mains socket properly
Power does not reach the appliance
There is no voltage in the mains sock- et (try to connect another appliance in- to it)
Solution
Connect the mains plug properly
Try connecting another electrical device to the power outlet
Call an electrician
Replacing the lamp
Caution! Disconnect the plug from the mains socket.
1.Press on the rear hook and at the same time slide the cover in the direction of the arrow.
2.Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the light bulb cover).
3.Install the lamp cover by fixing it into its original po- sition.
4.Connect the plug to the mains socket.
5.Open the door. Make sure that the light comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "Installation".
3.If necessary, replace the defective door gaskets. Contact the Service Center.
Technical data
Dimension of the recess |
|
Height | 1780 mm |
Width | 560 mm |
Depth | 560 mm |
Rising Time | 25 h |
Voltage | |
Frequency | 50 Hz |
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Installation
Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance
before installing the appliance. |
| |
10 |
| www.zanussi.com |
