–The display indicates the freezer temperature. In any case, after 10 seconds normal display conditions are restored.
Functions menu
Each time Function button is pressed, the following func- tions are activated in a clockwise direction:
•Fast Freeze function
•Shopping function
•no symbol: normal operation.
Important! You can set one function ON at a time.
To set the functions OFF, press the Function button sever- al times until no icon appears.
Temperature regulation
The temperature within the appliance is controlled by the Temperature regulator situated at the top of the appliance. The temperature of the fridge compartment may be regula- ted by rotating the Fridge temperature regulator, and may vary between more or less +2°C and +8°C.
The temperature of the freezer compartment may be regu- lated by rotating the Freezer temperature regulator, and may vary between more or less
For a correct storage of the food the following tempera- tures should be set:
+5°C in the fridge
During normal functioning the Temperature indicator shows the temperature currently set.
To operate the appliance, proceed as follows:
•turn the Temperature regulator clockwise to obtain the maximum coldness
•turn the Temperature regulator counter- clockwise to obtain the minimum coldness.
The intermediate position is usually the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
•room temperature
•how often the door is opened
•the quantity of food stored
•the location of the appliance.
Shopping Function
If you need to insert a large amount of warm food, for ex- ample after doing the grocery shopping, we suggest acti-
vating the Shopping function to chill the products more rapidly and to avoid warming the other food which is al- ready in the refrigerator.
The Shopping function is activated by pressing Function button (several times if necessary) until the corresponding
icon appears 
.
The Shopping function shuts off automatically after ap- proximately 6 hours.
It is possible to deactivate the function at any time by pressing Function button (see "Activation of functions" ) .
Fast Freeze Function
To freeze fresh foods, you will need to activate the Fast Freeze function.
Press Function button (several times if necessary) until the corresponding icon appears.
This function stops automatically after 52 hours.
It is possible to deactivate the function at any time by pressing Function button (refer to "Functions Menu").
Excessive temperature alarm
An increase in the temperature in the freezer compartment (for example due to a power failure) is indicated by:
•flashing temperature
•freezer compartment flashing (Freezer compartment in- dicator)
•red illumination of display
•sounding of buzzer
•alarm symbol.
When normal conditions are restored:
•the acoustic signal shuts off
•the temperature value continues to flash
•the display illumination remains red.
When you press Function button / Alarm reset switch to deactivate the alarm, the highest temperature reached in
the compartment appears on indicator 
for some sec- onds.
At this point the flashing stops and the display illumina- tion changes over from red to white.
During the alarm phase, the buzzer can be switched off by pressing Function button / Alarm reset switch.
The illumination of the display remains red until normal storage conditions are restored.
www.zanussi.com | 5 |
|
