Zanussi ZBB6284 D C E E B, Ha Hc, 8 mm, HaKHa Hb, ture sidewall, Push the part Hc on the part Ha

Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case.

ca. 50 mm

90°

21 mm

90°

ca. 50 mm

21 mm

D C

E

E B

Attach the covers (C, D) to the lugs and the hinge holes.

Install the vent grille (B). Attach the hinge covers (E) to the hinge.

Ha

Hc

G	Ha	Hb
H
	Hc
	Hd
Connect the appliance lat-	Disconnect the parts (Ha),
erally to the kitchen furni-	(Hb), (Hc) and (Hd).
ture sidewall:

1.Loosen the screws of the part (G) and move the part (G) till the fur- niture sidewall.

2.Tighten the screws of the part (G) again.

3.Attach the part (H) to the part (G).

8 mm 8 mm

HaKHa Hb

Install the part (Ha) on the inner side of the kitchen furniture.

Push the part (Hc) on the part (Ha).

Open the appliance door and the kitchen furniture door at an angle of 90°.

Insert the small square (Hb) into guide (Ha).

Put together the appliance door and the furniture door and mark the holes.

Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K).

12