Ventilation requirements
The airflow behind the ap- pliance must be sufficient.
50 mm | min. |
| 200 cm2 |
| min. |
| 200 cm2 |
Installing the appliance
Caution! Make sure that the mains cable can move freely.
Do the following steps:
x
x
2
1
4mm
44mm
I
I
If necessary cut the adhe- sive sealing strip and then apply it to the appliance as shown in figure.
Install the appliance in the niche.
Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture.
Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge.
Adjust the appliance in the niche.
Make sure that the distance between the appliance and the cupboard
The lower hinge cover (in the accessories bag) makes sure that the distance be- tween the appliance and the kitchen furniture is correct. Make sure that the clear- ance between the appliance and the cupboard is 4 mm. Open the door. Put the low- er hinge cover in position.
Attach the appliance to the niche with 4 screws.
11
