Operation
Before use
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Freezer controls
6
5
1
2
3
4
➀ ➁
1Pilot light (green)
2Thermostat control knob
3
➂ ➃ ➄
4Push button for
5Warning light (red)
Starting your appliance
Insert the plug into the wall socket.
The appliance can be activated by turning the thermostat knob (2) beyond the «O» position. When the pilot light (1) is illuminated and a sound is on only for 2 sec. this shows that the appliance is on.
Push the button (4), the sound signal alarm will get off and pushing the button a second time the super control light (3) light up. The freezer will start to operate.
The freezer is switched off by turning knob (2) to position «O» and a sound is on only for 2 sec.
Temperature control
The temperature inside the freezer is regulated by a thermostat with different temperature positions and one «OFF» (O) position.
Position «1» = minimum cold
Position «6» = maximum cold
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable, although the temperature will be affected by:
•Room temperature
•How often the door is opened
•How much food is stored
•Position of the appliance
In determining the correct temperature control setting
all these factors have to be considered and some experimentation may be necessary.
To obtain a lower temperature, turn the thermostat control to the highers numbers; to obtain a higher temperature turn the control to the lower numbers.
When altering the temperature setting, allow 24 hours for the temperature to stablise before making further changes.
Quick freezing
For
If the
The
4
